ATOMOS SHINOBI II

ATOMOS SHINOBI II

Atomos SHINOBI II, ultra-slim and light HDR monitor with 5-inch high-glos touchscreen, 1500 nits, perfect for vloggers, creatives and photographers.

Atomos Shinobi II, professional monitoring tool. Main features

• Body 30% thinner and low profile design - weighs only 210 gr.

• HDR display a 50% brighter - 1500 nits brightness - high resolution 5" touch screen.

• Camera control via USB-C for Canon, Panasonic and Sony cameras, in addition to Z CAM cameras via optional USB-C cable.

• Use the camera status indicators to check the camera's internal recording settings, battery status and the remaining recording time.

• The new AtomOS 11 user interface has a more modern look, a more agile operation and easy access to all the most used monitoring tools.

• Powered by NP-F batteries or by USB-C PD (entry 10 W). Also load/feed the camera using USB-C PD (exit 13 W).

• The included HDMI and USB-C Lock Adapter allows you to use the new Atomos Lock Cable Line for solid connectivity as a rock.

• The Single Analysis Mode can deploy the tools in wave form, histogram and vector simultaneously.

• The frame guides and grid 9 help get a perfect frame and composition.

• Low consumption: Shinobi II can work all day with a single battery charge

Camera control via USB-C

Camera control is now possible thanks to the USB-C connection.

Using the intuitive slide controls on screen you can adjust the white balance, the lens opening, the shutter/angle speed and ISO.

A screen with red edge indicates when the camera is recording internally, either activated by the camera or from the Shinobi II.

Shinobi II can control most cameras without mirror canon, Fujifilm, Nikon, Panasonic and Sony via USB-C.

All models of the Z CAM E2 series (requires LANC cable, which is acquired separately). The cameras of OM System and SIGMA will be compatible with future firmware updates.

Touch to Focus Function - Tactile Approach

Atoms 11.03.00 adds the possibility of adjust the camera focus point directly through the touchscreen interface of the Atomos Shinobi II.

Camera compatible with the Touch Approach function (Touch to Focus):

Canon: EOS R6 Mark II, EOS R1, EOS R5 Mark II and EOS R7
Fujifilm: GFX100 II & X-S20
Nikon: Z9 & Z8
Panasonic: LUMIX S5 II & LUMIX S5 II X
Sony: A7 IV, A7S III, ZV-E10 II, FX3 & FX30

Finest design and ultra-bright HDR display of 1500 nits

Atomos has been developing an amazing monitoring and recording technology for over a decade.

Shinobi II has been redesigned with a new housing 30% thinner and a 50% brighter screen, and still includes all the renowned HDR screen processing technology and professional monitoring tools.

A powerful monitor with a hDR/SDR 10-bit 5" and 1500 nits allow you to see your images clearly even in full daylight. In addition, it has a special anti-reflection coating and anti-huella technology.

With a dynamic range of more than 10 steps in real time, compatible with Log, PQ and HLG signals. Its exclusive HDR monitoring functions simplify recording in these formats, allowing replication of post-production workflows during filming.

La calibration is essential to ensure the accuracy of the colors on a monitor. The Shinobi II can be calibrated using a Calibrite Display Pro HL or Plus HL probe, or via the Atomos Calibrator app, ensuring continuous and accurate monitoring of both HDR and HL Rec.709. Accurate monitoring translates into reliable results

Perfect for professional videography and photography

Atomos Shinobi II works all day with a single battery. Ideal for long working sessions.

Shinobi II includes monitoring tools for approach, frame and exposure, including focus peaking, zoom 4:1/2:1/1:1, zebra, fake color, ARRI False Color and colored display modes The Zone (control of exposure by real-time zones), frame guides, SMPTE safe area, grid markers, RGB wave shape parade, vector, a multi-visual "analysis" view and a LUT 3D and flexible 1D, profile support and presets and monitoring options for anamorphic decompression (2x, 1.8x, 1.79x, 1.65x, 1.6x, 1,5x, 1.33x, 1.25x).

The multi-tool analysis view offers you all the essential information at a glance. There's even the selfie mirror mode which is particularly useful for vloggers, allowing proper visualization during front recordings

Shinobi II monitor is the perfect accessory for improving any photographic or video production.

Touch shot

Atomos Shinobi II incorporates a function touch shot which allows you to capture photos directly from the monitor screen. This feature is especially useful for techniques such as bracketing HDR, where multiple exhibitions of the same scene are taken to combine them later and obtain an image with an enlarged dynamic range. Thus, photographers and videographers can more efficiently manage the capture of these multiple exhibitions, facilitating the process of creating HDR images

Cable locking system

The adapter hDMI Lock and USB-C included, allows you to use the new Atomos blocking cable line for a solid connectivity avoiding accidental disconnections during use

Atomos Shinobi II - Specifications

Physical

• Dimensions (W x H x D mm): 151mm x 91.5mm x 20.8 mm (28.5mm with locking cable adaptor attached
• Weight: 210g / 7.4oz.
• Mounting Points: Bottom: 1 x 1/4-inch 20 with anti-rotational points

Environmental

• Ambient Operating Temperature: Up to 40 degrees Celsius

Construction

• Body: ABS Polycarbonate Plastic
• Cooling: Passive heat sink
• Multi-Function Button: Power / Lock Screen
• Touch Screen: Capacitive Touch

Power

• Input Voltage: 6.2V to 16.8V
• Compatible Batteries: 1 x NP-F / L-Series
• Built-in battery: No
• Continuous power: Via NPF battery or USB-C PD
• DC-In Connector: Via Battery Eliminator (separate purchase)
• D-Tap: Via optionally available Battery Eliminator or D-Tap to DC-Barrel Cable

Display

• Display Panel: SuperAtom IPS Panel (Capacitive Touch)
• Size: 5.2-inch
• Resolution: 1920 x 1080
• Viewing Angle: 178 + H & V
• PPI: 427
• Bit Depth: 10-bit (8+2 FRC)
• Backlight Type: Edge-lit
• Brightness (cd/m2 / nits): 1500
• Aspect Ratio: 16:9
• Color Gamut: Rec.709
• Calibration Support: Atomos Calibrator on PC/Mac with Calibrite ColorChecker Display Pro & ColorChecker Display Plus + Simple on-device calibration (connect Calibrite probe directly to Shinobi II via USB-C)

Color Pipeline

• Gamma:
  Sony S-Log / S-Log2 / S-Log3, Canon C-Log / C-Log 2 / C-Log3, Panasonic V-LOG, Arri LogCEI160 / LogCEI200 / LogCEI250 / LogCEI320 / LogCEI400 / LogCEI500 / LogCEI640 / LogCEI800 / LogCEI1000 / LogCEI1280, RED Log3G12 / RED LogFilm / PQ10K / LOG3G10, Fujifilm F-Log / F-Log2, Nikon N-LOG / HLG, Olympus OM-LOG400 / FLAT, OM-System OM-LOG400 / FLAT, Leica L-LOG

• Gamut:
  BT2020, DCI P3, DCI P3 65, Sony SGamut / SGamut3 / SGamut3.cine, Canon Cinema / DCI P3 / DCI P3+ / BT 2020, Panasonic V Gamut, ARRI Alexa Wide Gamut, Rec.709, JVC LS300, RED DragonColor / DragonColor2 / REDColor2 / REDColor3 / REDColor4 / REDWideGamut

• 3D LUT Display: .Cube format (17 & 33 points supported)
• 3D LUT 50/50 Split: Yes
• Monitoring Modes: SDR Native, HDR HLG, HDR PQ, 709 LUT, User LUT
• Display Controls: Backlight, Lift, Gamma, Gain
• AtomHDR: Built-in Technical Log to HDR EOTF
• 3D LUTs: Load .Cube files from SD Card into 8 LUT Slots On-Device & use for Monitoring

Video Input

• HDMI: 1 x HDMI (1.4)
• Bit Depth: 8 / 10-Bit
• Chroma Subsampling: YCbCr 4:2:0 > 4:2:2

Audio In/Out

• HDMI Embedded: 2-channel, 24-bit, input dependent
• Headphone Out: 3.5mm headphone jack, 2-channel

Resolution and Frame Rates (Monitoring)

• 4K DCI: 23.98/24/25/29.97/30
• 4K UHD: 23.98/24/25/29.97/30
• FHD 1920 x 1080 Progressive: 23.98/24/25/29.97/30/50/59.94/60
• FHD 1920 x 1080 Interlaced: 50i/60i
• 1280 x 720 Progressive: 50/59.94/60p

Supported Media

• SD Card: Update firmware & upload LUTs
• File System: FAT32, NTFS

On-Screen Tools

• MultiScope Analysis View: Image, waveform, histogram, & vectorscope
• Waveform: 3 sizes – adjustable opacity & brightness
• Histogram: 3 sizes – adjustable opacity & brightness
• RGB Parade: 3 sizes – adjustable opacity & brightness
• Vectorscope: 1 size – adjustable opacity & brightness
• 1 x Zoom: Tap to Zoom
• 2 x Zoom: Tap to Zoom
• 4 x Zoom: Tap to Zoom
• Focus Peaking: 4 modes (color, black & white, outline, edge sharpening) with adjustable outline color & peaking intensity
• Colorized Exposure: Atomos & Arri False Color, EL Zone SystemTM
• Zebra: Adjustable threshold (50% to 105%)
• Isolate Color Channel: Blue only
• Cinema Frame Guides: Presets for 2.41, 2.35, 1.91, 1.9, 1.85, 16:9
• Social Frame Guides: Presets for 9:16, 4:5, 2:3, 1:1, 5:4, 4:3, 3:2
• Safe Areas: SMPTE Safe Title Area – 93% & 90%
• Grid Markers: 9 grid
• Anamorphic Desqueeze: 2x, 1.8x, 1.79x, 1.65x, 1.6x, 1.5x, 1.33x, 1.25x
• Display Flip: Horizontal & Vertical

External Device Control

• USB-C: Camera control for supported cameras via USB-C. Controllable functions: Record Trigger, White Balance, Shutter Speed, Shutter Angle (if supported by camera), Aperture, ISO, Camera Overlays, Record Indicator
• Serial 2.5mm Jack: Camera control for Z CAM cameras via optional USB to Serial Cable

What's in the box

• Included: Shinobi II, USB-C 2.0 cable, HDMI + USB-C locking cable adapter, Quick Start Guide
• Optional Accessories: Quick Release Mount Monitor, NP-F Battery Eliminatior, DC to DTap Cable, Power Kit, HDMI cables, USB-C to serial cable