KILOVIEW RMG-300

KILOVIEW NDIKE1ND
The Kiloview E1 NDI encoder is a solution designed to convert a SDI signal (video and audio) into a compressed signal transport H.264 using an NDI-HX IP protocol and connecting to Ethernet-compatible equipment. It is a robust team capable of operating 24x7 in a professional environment, and where a low latency video conversion is required (= 67) in maximum resolution environments up to 1080p60. The E1 interface also supports video conversion to other protocols, such as RTMP/HLS/SRT/TS over UDP, and/or recording against a Micro SD card (not included). The equipment also includes an analog audio input/output, and is supplied with a power supply (non-PoE converter). 1 year wide warranty to 2 without cost by registering the product on the Kiloview website (https://bityl.co/JZxc).

KILOVIEW NDIKE2
Encoder HD-HDMI to IP (SRT, etc.). The encoder Kiloview E1-S is a solution designed to convert an HDMI signal (video and audio) into a compressed signal transport H.264 using an IP protocol and connecting to Ethernet-compatible equipment. It is a robust team capable of operating 24x7 in a professional environment, and where a low latency video conversion is required (= 67) in maximum resolution environments up to 1080p60. The E2 interface supports video conversion to different IP protocols, such as SRT/RTMP/HLS/TS over UDP, and/or recording against a Micro SD card (not included). The equipment also includes an analog audio input/output, and is supplied with a power supply (non-PoE converter). 1 year wide warranty to 2 without cost by registering the product on the Kiloview website (https://bityl.co/JZxc). guarantee.

The remote Kiloview E3 is a new generation video encoder with video input features and loop through with HDMI up to 4K P30 and 3G-SDI up to 1080 P60, encoding both HDMI and 3G-SDI by H.265 and H.264 simultaneously one or two sources, or a video mix of both video sources with multiple protocols, including NDI HX3/NDI HXRT/SRT With updated chipset and HEVC technology, it supports transmission to 16 destinations2 with adjustable bit speed up to 100Mbps simultaneously. 1 year wide warranty to 2 without cost by registering the product on the Kiloview website (https://bityl.co/JZxc). guarantee.

KILOVIEW NDIKMG300V2
The Kiloview MG300 media encoder-decoder is a high-performance multifunctional device. It integrates functions such as 4K H.264/ H.265 IP multichannel video decoding between NDIATAHX, SRT, RTMP, RTSP, TS-UDP and HLS to SDI (3G-HD) and HDMI (4K) output, with a minimum delay of less than 200ms in a network environment. It supports cross decoding of up to 9 different protocols simultaneously, with the ability to converter an input flow up to 4 different output protocols. 1 year wide warranty to 2 without cost by registering the product on the Kiloview website (https://bityl.co/JZxc).

+information in https://www.kiloview.com/en/video-gateway/

KILOVIEW NDIKRD350
Kiloview RD-350 Decoding Card. Decodes IP flows to HD-SDI and HDMI video dev outputs, allowing different content to be sent by each interface. The card is compatible with NDIVAHX protocols 3.0-2.0, SRT, RTMP, RTMPS, RTMP Server, HLS, TS on UDP, RTP and RTSP and decode H.264 or H.265. It is able to manage decoding up to 9 channels 1080p30 or 8 channels of 1080p60. In addition to the audio embedded in SDI and HDMI, it has analog audio output of 3.5mm. 1 year wide warranty to 2 without cost by registering the product on the Kiloview website (https://bityl.co/JZxc).

Note: This card model allows to be inserted into a 1 or 3U cranium chest.

KILOVIEW NDIKRE1V2
HD-SDI encoder card (up to 1080p60) to IP protocols, including SRT/RTMP/ RTMPS/HLS/TS on UDP/RTP/RTSP /Onvif, working in a compression environment H.264. The card includes SDI output by-pass and supports embedded audio in the SDI or analog audio (line) via your audio channel sterero minijack 3.5mm. 1 year wide warranty to 2 without cost by registering the product on the Kiloview website (https://bityl.co/JZxc).

Note: This card model allows to be inserted into a 1 or 3U cranium chest.

KILOVIEW NDIKRECORD
Independent recording software and up to a maximum of up to 20 channels, for the recording of NDI and/or NDI ATAHX sources, individually or synchronized (via NTP), from captors (compatible with Kiloview models) and NDI signal sources. The software supports HD and 4K resolutions (up to p60), registers in .mov extension files, and its limitation is given by computer capabilities (CPU, bandwidth, disk space and media writing speed). License only for Windows computers, and manageable from Web/KiloLink Server.

Note: It is possible to test the application for 15 days by downloading a license from the link https://www.kiloview.com/en/ndi/ndi-recorder/. This test version, perhaps provisional, is required for a final validation process. Since the provisional identification generated by the trial version is associated with the computer, this license should be installed on the final computer.

Kit of 2 SSDs of 1TB each compatible with the Cube R1 multigraver and able to support several hours of recording depending on the resolution and type of NDI. 3 years warranty.

Kit 2 SSDs of 2TB each compatible with the Cube R1 multigraver and able to support several hours of recording depending on the resolution and type of NDI. 3 years warranty.

KILOVIEW RD-260
NDI-HX/SRT/RTSP/RTMP/HLS decoder card to SDI and HDMI video (up to 1080p60). The card supports several output encoding (4x1080P30 or 2x1080P60) and audio out embedded in the analog audio SDI video connections (line) through its audio channel sterero minijack 3.5mm. 1 year wide warranty to 2 without cost by registering the product on the Kiloview website (https://bityl.co/JZxc), and 3 by special contract.

Note: This card model allows to be inserted into a 1 or 3U cranium chest.

KILOVIEW RN01
Chasis Rack 19", 1U to locate up to 4 Kiloview converters (not included)

Chasis Rack 19" and 3U height designed to place within up to 10 Kiloview converters (not included). The chest is compatible with N3/N4/N30/N40/N5/N6 models. 1.8Kg weight and dimensions 483mm wide, 94.3mm height and 133.5mm deep.

KILOVIEW RU01
1RU-4CH Chasis in standard format 19p and 1U height (4,5cm), with dual power supply (a redundant) and with capacity to locate and fix up to four cards (coders, decoders, etc.). 1 year warranty.

KILOVIEW RU03
Kiloview RU03. 3RU-16CH Chasis in standard format 19p and 3U height (13.5cm), with dual power supply (a redundant) and with capacity to locate and fix 16 cards of a bay (encoders, decoders, etc.). 1 year warranty.

KILOVIEW S2 Kiloview S2 is a top-end transmitter that delivers In/Out HDMI 2.0 connections, maximum supported 4Kp30 resolution, H.264 compressions and optimized H.265, and PoE power supply. The S2 offers a main transmission output (4K) and a secondary school (1080p), which can be transmitted simultaneously to 8 destinations each, for a total of 16 transmissions. The S2 is compatible with HDMI 2.0, with embedded and analog audio inputs. It simultaneously supports RTMP/RTMPS streaming, as well as NDIIVAHX and is suitable for remote productions by SRT. A Tally indicator allows you to use it in productions with several cameras, and optional Kiloview software allows intercom functions. As the output is transmitted and displayed locally, the S2 allows you to record the output on an appropriate USB drive or on an optional NAS. 1 year wide warranty to 2 without cost by registering the product on the Kiloview website (https://bityl.co/JZxc).

Advanced replacement warranty for a total duration of 36 months (including initial warranty of 12 months). Free shipping and collection within the EU, and advanced replacement (definitive or provisional) if the equipment cannot be repaired via telematics or in a few days in case of sending. This extension of service must be hired at the time of purchase along with the equipment that supports it.