SMALLRIG SM3262
Follow focus control unit.
It has a 1400mAh battery that lasts approx. 20h, it has power failure memory function that saves repeated lens calibration and point AB configuration.
0.96" ultra-low power OLED display with RGB lighting effect and vibration warning function provides a simple but efficient interaction experience.
The BLE module assists in the REC wireless start/stop, which can also be done by means of control cables (ID: 3325, 2971, 2970, depending on the type of camera) with motor.

SMALLRIG SM3263
Wireless receiver motor.
0.52 OLED screen "with ultra-low power, supports a 5 V-16.8 V wide input voltage, fast loading and provides a 9 V/18 W and 0.5 Nm pair output. It can be powered with a battery plate (ID: 3777) with NP-F batteries or with a USB-C cable to D-Tap (ID: 3266) and a USB-C cable to CC (ID: 3268) with V-Mount batteries. The wireless receiver engine has an F15 bar clamp.
In cable mode, it has an ultra-low delay of approximately 5 ms.

SMALLRIG SM3319
4x5.6 filter band for Mattebox 3196 and 3575.

SMALLRIG SM3320
4x4 filter band for Mattebox 3196 and 3575.

SMALLRIG SM3383
95mm external adapter ring set to thread 86, 62, 58, 55, 52

SMALLRIG FS3408
SM2660 adapter ring kit (114 mm-80 mm/85 mm/95 mm/110 mm), allows you to quickly attach your box mat to the front of the lens. The kit includes 4 clamping rings and 1 storage bag. The adapter rings are compatible with the lens with a frontal external diameter of F80mm / F85mm / F95mm / F110mm. Made of durable and high resistance POM material. The adapter ring features a split design that allows a smooth compression that securely attaches the matt box to the lens.

SMALLRIG FS3409
Silicone donut for Matte Box of 114mm.
It adapts to lenses from 58 to 114 mm in front diameter and blocks light. It includes transport bag.
Designed for SmallRig Matte Box 2660 to overcome light leaks. It supports lenses from 58 mm to 114 mm of external diameter without changing the adapter rings so often. The highly flexible silicone hood fits directly onto the front of the lens and then fits into the matt 2660 box through a 114 mm metal ring, while an additional LWS bar holder is required for the matt 2663 box to hold the matt box and prevent it from twisting. It has four outer points for easy adjustment and reinforced linings to avoid stained as a result of collapse.

SMALLRIG SM3410
Clamping ring kit for 2660 (114 mm-67mm/72 mm/77 mm/82 mm/86m), allows you to quickly attach your box mat to the front of the lens. The kit includes 5 clamping rings and 1 storage bag. Made of durable and high resistance POM material. The adapter ring features a split design that allows a smooth compression that securely attaches the matt box to the lens.

SMALLRIG SM3410 (Used)
Clamping ring kit for 2660 (114 mm-67mm/72 mm/77 mm/82 mm/86m), allows you to quickly attach your box mat to the front of the lens. The kit includes 5 clamping rings and 1 storage bag. Made of durable and high resistance POM material. The adapter ring features a split design that allows a smooth compression that securely attaches the matt box to the lens.

Category: USED

SMALLRIG SM3463
Holding ring for Matte Box 2660 (114 mm-95 mm)
- Split design for a safe fit.
- For objectives with a frontal diameter of 95 mm.
- With anti-torsion edge to avoid accidental disconnections and ensure safety.

SMALLRIG FS3575
Mini matte box designed for DSLR. It works with sized 52-95 mm adapter rings; 55-95 mm; 58-95 mm; 62-95 mm; 67-95 mm; 72-95 mm; 77-95 mm; 82-95 mm; 86-95 mm or connected directly to the 95mm lens. Adapter ring to diameters of 92.5 mm internal.
Using the filter tray (3319/3320) you can quickly install with 4 plug-in filters of 5,65"/4 x 4" of 4 mm mounted through a NATO clamp.
? The 100mm square filters are not supported.

4x5,65 ND4 solid neutral filter (0.6). Light transmission 25%. Reduce 2 stops.
Smallrig ND filters are designed for professionals. It comes with 7 specifications that vary in the light transmission from 0.78% to 50%, in correspondence with the 7-step light extinction. With optical glass, the filters are precisely emerald and polished to use with a 4 x 5,65" filter tray or a matte box. Manufactured with B270 optical glass of high clarity and high transmission from Germany, this filter is coated on both sides with a multilayer nanorevestment to ensure high-precision color reproduction. These coatings are resistant to mold, water, oil and lightning, making the item easy to clean and store, and ideal to use in filming videos or movies. The filter allows a wider opening to achieve a greater blur of the background and control the sharpness of the image, thus improving the latitude and quality of the image.
Includes transport case and cleaning cloth.