TERADEK TER-BIT600 Teradek Bit-600 Batt Plate Canon BP-970G 7.2v 2-pin Lemo.
Teradek Bit-600 Batt Plate for Canon BP-970G 7.2v 2-pin Lemo, ...
Teradek Bit-600 Batt Plate for Canon BP-970G 7.2v 2-pin Lemo, ...
The Teradek ACE 750 is a professional wireless video system with HDMI connections (with input/output on the transmitter and receiver set) designed to work with HD or UHD-4K video signals (up to 2160p30), HDR or SR dynamic ranges, and in environments where your almost zero delay is valued (0.01 milliseconds of latency) and your coverage distance (with a linear range of 230 meters) The emitter can be complemented with up to six receivers, and can be managed by the Bolt Manager app for iOS and Android. 1 year warranty.
Note: the emitter must be externally fed by an external feeder (not powerbank). Includes 1 AC power supply and 1 HDMI cable included.
Extra receiver compatible with Teradel Ace 750 TX (included in the transmitter/receptor kit). HDMI output in HD or UHD-4K environments (up to 2160p30). 2 years warranty.
Power supply 18Watt AC with barrel connector. F.A compatible with the Teradek ACE750 video transmitter
Bolt LT/XT Batt Plate for Sony L Series and Canon LP-E6
Bolt LT/XT Batt Plate for Sony L Series and Canon LP-E6
Category: USED
Battery adapter L with barrel connection to power an electronic Teradek ACE 750.
HD-SDI/HDMI transmitter TERADEK BOLT 500 TX
. s/n 0193602537
- HD-SDI/HDMI receiver TERADEK BOLT 500 RX
. s/n 0193703110
- Feeder
- European current adapter
- Flat corner
- 2x Antena
- Latiguillo DTap - Lemo
- 2x Latiguillo HDMI / SDI (to be defined)
- NP-F battery adapter (only transmitter)
- 2x NP Battery
- Battery charger
- Transport case
- HD-SDI/HDMI transmitter TERADEK BOLT 1000 TX
. s/n 0196600214
- HD-SDI/HDMI receiver TERADEK BOLT 1000 RX
. s/n 0196700264
- Feeder
- European current adapter
- Flat corner
- 7x Antena
- Latiguillo DTap - Lemo
- 2x Latiguillo HDMI / SDI (to be defined)
- NP-F battery adapter (only transmitter)
- 2x NP Battery
- Transport case
System transmitter Teradek Bolt 300 Wireless HD-SDI.
Category: USED
Teradek Bolt XT 500 is a set consisting of a transmitter and a WiFi receiver (2.4 & 5.8 GHz) that transmits video/audio without compression (from SD to Full HD1080 60p and a maximum distance of 152 meters) and without delay (zero delay, ?0.001sec), and includes HDMI-HD-SDI inputs (with loop) in HDMI-HD-SDI transmitter and outputs in the receiver.
The set requires external power through the included feeders (in the receiver) or optional battery adapters (especially the transmitter). The package is supplied in a small transport case next to a collection of accessories:
Emissor (TX)
1 x 2-pin Connector to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
2 x Antenna 2dBi WiFi 2.4/5.8 GHz
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm
Receptor (RX)
1 x Lightstand Adapter (1/4"-20 inch)
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm
Added features:
Metadata, TC, start/stop flags from certain camera manufacturers
3D Luts, 5Ghz spectrum analizer, manual channel selection
Color sampling: SDI: YCCr 4:2:2, 10bit (8bit when format conversion is enabled) / HDMI: RGB 4:4:4:4, 8bit
Audio Compression: 48kHz 24bit PCM
Power supply: 2pin connector 7-28 VDC
Sizes and weights: TX: 10.2x 6,6x 2,4cm (226g) and RX: 15,2x 8,6x 2,5cm (299g)
1 year warranty.