- Pack

* Support SMALLRIG SM2203 KIT
- Cage SMALLRIG SM2203
- Upper SMALLRIG FS1955
Instead of €108.89
Total Warranty
Since 1994
Check conditions
93 424 20 06 | masquevideo@masquevideo.com
This pack including:
BLACKMAGIC MICRO CONVERTER - SDI TO HDMI 3G with PSU
Micro Converter HD-SDI 3G to HDMI. Small and compact converter for the transformation of an HD-SDI signal to HDMI.
The team includes video signal input and bypass along with a master output. It is powered by a USB-C connection (feeder supplied). Accept HD resolutions up to 1080p60. 3 years warranty.
This model has been specifically designed to monitor the quality of the images. It includes a 17-point 3D conversion table (LUT) to calibrate monitors, projectors or televisions, which can also be applied to the signal transmitted through the derived SDI output. It should also be noted that the converter provides compatibility with DCI image formats and frequencies, for example, 1080p24, 1080p47.95 and 1080p48.
CYANVIEW CY-RCP-DUO
The Cyanview CCP is a multi-layer and multi-mark control panel that can provide effective electronic, optical and mechanical control over a wide range of professional video cameras, cinematography, PTZs, miniature cameras, color fixers, and even compatible gymbals and lenses. Up to 2 controlled units in the DUO version (there are versions for 4 or 8 controllable, and a version with unlimited controls).
The physical buttons and touch screen included in the RCP electronics offer instant access to most camera settings. Integration with routers or switches provides quick access to the selected cameras, and from a single panel. All Cyanview technologies are integrated to offer a whole set of key features: tally, wireless, wi-fi, remote production, pan-tilt and gimbal head control, motorized objectives, etc. Note: PCR can be powered via Ethernet-PoE or by a CY-PWR-1A-21 power supply (not included)
There is a wide list of compatibility following this link: https://www.cyanview.com/
NOTE: It is possible to make UpGrade future from a RCP-DUO to a camera limitless RCP with an overrun of €1,500+Iva
CYANVIEW CY-RCP-QUATTRO
The Cyanview CCP is a multi-layer and multi-mark control panel that can provide effective electronic, optical and mechanical control over a wide range of professional video cameras, cinematography, PTZs, miniature cameras, color fixers, and even compatible gymbals and lenses. Up to 4 controlled units in the QUATTRO version (there are versions for 2 or 8 controllable, and an unlimited controllable version).
The physical buttons and touch screen included in the RCP electronics offer instant access to most camera settings. Integration with routers or switches provides quick access to the selected cameras, and from a single panel. All Cyanview technologies are integrated to offer a whole set of key features: tally, wireless, wi-fi, remote production, pan-tilt and gimbal head control, motorized objectives, etc. Note: PCR can be powered via Ethernet-PoE or by a CY-PWR-1A-21 power supply (not included)
There is a wide list of compatibility following this link: https://www.cyanview.com/
NOTE: It is possible to make UpGrade future from a CPR-QUATTRO to a CPR without camera limit with an overrun of €1,000+Iva
E-IMAGE ED360M
Motorized travelling kit consisting of:
Dolly of lightweight aluminum extensible adjustment. 5 aluminium tracks of 97.5 cm. 5 Foam structure bases for the tracks. Weight supported: 20 Kg. Transport weight: 12 Kg. Dimensions of the transport case: 105 x 18 x 33 cm.
FONESTAR FMW-520T
Waterproof transport case with trolley.
Compact and robust, stackable, shock resistant, dust and water.
Hermetic closure, pressure valve and folding transport handle.
Protection grade IP-67.
Ready to close with lock.
Metallic parts in stainless steel.
PP construction for transport and protection of various materials.
Silent wheels and maximum 35 mm extendable puller.
Accepted as hand luggage in cabin in most airlines.
Foam precut.
Black finish.
Max charge supported: 40Kg
Measures: Foreign: 55'9 x 22'9 x 36 cm background, Interiors: 52'1 x 18'3 x 29'2 cm background
Weight: 5'3 kg
E-IMAGE GA230
3-section tripod with central column and gears for equipment up to 12Kg. The enlarged central column provides additional height if you need to place the camera high. Includes bubble level and rubber feet with retractable rods that can be used in irregular terrain. The tripod is compatible with the dolly EI-7004C. The tripod includes intermediate crab, support bag and transport strap.
Work heights from 84 to 230cm. Transport measuring 89cm.
Weight 4.8Kg.
E-IMAGE GAM260D
Motorized lifting system with wheels designed specifically for PTZ cameras. It uses an electric motor and a remote control system to achieve height settings. With its 3-section column and its remote control system with memory configurations, it greatly improves efficiency and expands creative possibilities.
Maximum charge: 30 Kg. Working heights: 98 to 280 cm.
E-IMAGE PSK04
Basic tripod kit for 2 PTZ. Includes column with RS-860 wheels, 2 BSA-04 adapter, 5/8 to 3/8" MT-019 adapter and two 3/8" to 1/4" adapters.
Work height 133 to 220 cm. Weight supported: 10 Kg.
E-IMAGE EK650
75mm EH650 trotula kit with GA752S light aluminum legs.
The counterbalance head and continuous friction provides a counterweight to support loads of 0 to 5 Kg. The 501PL GP1 fast anchor shoe is compatible with a variety of accessories and the GB2 extendable arm provides precision in movements.
Eltripode with medium-high GS01 stabilizer and ergonomic closures is quick to operate and has a double-prick finish with independent protective shoes.
Compatible with the GS02 soil stabilizer and the EI-7003C dollys - EI-7004C.
A soft bag SC1.
NETGEAR MS108EUP-100EUS
Switch NetGear 8 ports 1GB Ethernet+feeding PoE+ (4 ports) and PoE+ (4 ports), in supermesa format. Maximum power (230W). 2 years warranty.
The RA-AT001 automatic tracking application, compatible with the PTZ Canon CR-N700, N500 or N300, allows you to define a tracking frame for the camera to recognize and follow the target set. This application, which is part of Canon's additional application system, is installed directly on the camera and does not require the use of a computer. With visual analysis on the camera, the Auto-Tracking app is ideal for commercial presentations, conferences and other events. perpetual license per chamber.
DATAVIDEO TP-900
Teleprompter structure, which supports almost all PTZ cameras. When mounting the PTZ backwards removes the operating limitations of a camera within a prompter, offering greater location comfort. It can be mounted on a light tripod or on a lighting support (not included). It is supplied with a 15.3" LCD monitor and the DV Prompter Plus application for a complete PTZ teleprompter solution. 1 year warranty.
Flexible rates
Our rental rates are tailored to your needs. We offer different short, medium or long term rental options, so you only pay for the time you really need. Check the options available on our rental page to choose the one that best fits you.
Collection and Returns
You can collect the product at our facilities or, if you prefer, arrange the return at the same store or by the method that we previously match. Make sure you return the product on the stipulated dates to avoid additional charges.
Transport
If you need us to send you the product, we offer a home transportation service. Shipping costs are calculated based on the location and size of the product. You can also choose to collect the item at our facilities if you prefer not to pay the cost of transportation.
More information:
https://www.masquevideo.com/es/content/alquiler-mas-que-video-profesional-tarifas-transporte-recogida
- Cage SMALLRIG FS2087
** OPTIONAL **
- Upper
- Raíl NATO SM1409
- Cage SMALLRIG FS3007
** OPTIONAL **
- Upper
- Cage SMALLRIG SM3456
- HDMI cable
- Parasol
- Correa
- Cage SMALLRIG FS4184
- Cage SMALLRIG FS398
** OPTIONAL **
- Upper
- Side
- Single bar support
- Cage SMALLRIG FS2008
- VLock Support SMALLRIG SM2987
- Cheeseplate paar support VLock
- HDMI cable
- Correa
** NO INCLUDING / OPCIONAL **
DTap power cable - Universal for Shogun Inferno.
- Cage SMALLRIG FS3668
** OPTIONAL **
- Upper
- Cage SMALLRIG SM3278
- HDMI anchor
- Top plate for Sony ILME-FX3/FX30 camera handle.
check_circle
check_circle