TERADEK 11-0848

Teradek Bolt XT 500 is a set consisting of a transmitter and a WiFi receiver (2.4 & 5.8 GHz) that transmits video/audio without compression (from SD to Full HD1080 60p and a maximum distance of 152 meters) and without delay (zero delay, ?0.001sec), and includes HDMI-HD-SDI inputs (with loop) in HDMI-HD-SDI transmitter and outputs in the receiver.

The set requires external power through the included feeders (in the receiver) or optional battery adapters (especially the transmitter). The package is supplied in a small transport case next to a collection of accessories:

Emissor (TX)

1 x 2-pin Connector to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
2 x Antenna 2dBi WiFi 2.4/5.8 GHz
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm

Receptor (RX)

1 x Lightstand Adapter (1/4"-20 inch)
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm

Added features:

Metadata, TC, start/stop flags from certain camera manufacturers
3D Luts, 5Ghz spectrum analizer, manual channel selection
Color sampling: SDI: YCCr 4:2:2, 10bit (8bit when format conversion is enabled) / HDMI: RGB 4:4:4:4, 8bit
Audio Compression: 48kHz 24bit PCM
Power supply: 2pin connector 7-28 VDC
Sizes and weights: TX: 10.2x 6,6x 2,4cm (226g) and RX: 15,2x 8,6x 2,5cm (299g)

1 year warranty.

1 x 2-pin Connector to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
2 x Antenna 2dBi WiFi 2.4/5.8 GHz
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm

Receptor (RX)

1 x Lightstand Adapter (1/4"-20 inch)
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm
5 x Antenna 2dBi WiFi 2.4/5.8 GHz

Added features:

Metadata, TC, start/stop flags from certain camera manufacturers
3D Luts, 5Ghz spectrum analizer, manual channel selection
Color sampling: SDI: YCCr 4:2:2, 10bit (8bit when format conversion is enabled) / HDMI: RGB 4:4:4:4, 8bit
Audio Compression: 48kHz 24bit PCM
Power supply: 2pin connector 7-28 VDC
Sizes and weights: TX: 10.2x 6,6x 2,4cm (226g) and RX: RX: 13,8x 8,9x 2,4cm (376g)

The Teradek ACE 750 is a professional wireless video system with HDMI connections (with input/output on the transmitter and receiver set) designed to work with HD or UHD-4K video signals (up to 2160p30), HDR or SR dynamic ranges, and in environments where your almost zero delay is valued (0.01 milliseconds of latency) and your coverage distance (with a linear range of 230 meters) The emitter can be complemented with up to six receivers, and can be managed by the Bolt Manager app for iOS and Android. 1 year warranty.

Note: the emitter must be externally fed by an external feeder (not powerbank). Includes 1 AC power supply and 1 HDMI cable included.

Extra receiver compatible with Teradel Ace 750 TX (included in the transmitter/receptor kit). HDMI output in HD or UHD-4K environments (up to 2160p30). 2 years warranty.

Bolt LT/XT Batt Plate for Sony L Series and Canon LP-E6

Bolt LT/XT Batt Plate for Sony L Series and Canon LP-E6

Category: USED