Rental TERADEK BOLT-1000
- HD-SDI/HDMI transmitter TERADEK BOLT 1000 TX
- HD-SDI/HDMI receiver TERADEK BOLT 1000 RX
- Feeder
- Rhotula
- 7 antennas
- Latiguillo connector Lemo - PT
- 2 SDI-coated spiral latiguillos
- 2 HDMI Latiguillos
- 2 USB cables
- Suitcase
Rental TERADEK BOLT-1000
Teradek
Bolt XT1000 is a set consisting of a transmitter and receiver
WiFi (2.4 & 5.8 GHz) transmitting video/audio without compression
(from SD to Full HD1080 60p and a maximum distance of 305 meters) and
without delay (zero delay, ?0.001sec), including HDMI-HD-SDI inputs
(with loop) on the transmitter and HDMI-HD-SDI outputs in the receiver.
The set requires external power through the
power supply (in the receiver) or battery adapters
optional (especially the transmitter). The package is supplied in
a small transport suitcase next to a collection of accessories:
Emissor (TX)
1 x 2-pin Connector to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
2 x Antenna 2dBi WiFi 2.4/5.8 GHz
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm
Receptor (RX)
1 x Lightstand Adapter (1/4"-20 inch)
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm
5 x Antenna 2dBi WiFi 2.4/5.8 GHz
Added features:
Metadata, TC, start/stop flags from certain camera manufacturers
3D Luts, 5Ghz spectrum analizer, manual channel selection
Color sampling: SDI: YCCr 4:2:2, 10bit (8bit when format conversion is
enabled) / HDMI: RGB 4:4:4:4, 8bit
Audio Compression: 48kHz 24bit PCM
Power supply: 2pin connector 7-28 VDC
Sizes and weights: TX: 10.2x 6,6x 2,4cm (226g) and RX: RX: 13,8x 8,9x 2,4cm
(376g)