HOLLYLAND PYRO 7
7" wireless transmission monitor with reach 400 m.
Main features:
- 1TX And 4RX
- Scope 400 m and latency of 0.06 s
- Dual Band 2.4 GHz and 5 GHz
- Automatic frequency balance
- TX, RX, and Monitor - All in One
- Dual-View Quick Monitoring Switch
- 7 inches and 1200 nits
- Accurate image analysis
- Output in SDI and HDMI loop
- Streaming RTMP

Includes: 1x Wireless transmission monitor Pyro 7, 2x Pallet antenna (2.4 GHz and 5 GHz), 1x User Manual, 1x Warranty Card, 1x D-Tap to CC Power Adapter Cable with Lock, 1x Secure Digital Memory Card (32 G) and 1x USB-C OTG Adapter.

Category: USED

DJI SDR Transmission Pack
Stable transmitter and receiver pack and anti-interferences
- It offers a transmission distance of up to 3 km
- High bit rate of 20 Mb/s and image quality 1080p FHD
- Incorporates a USB-C output monitoring method
- Emission mode with an unlimited number of receivers
- Ronin Compatibility and Remote Control

The box includes a transmitter/receptor, a USB-C cable and a couple of mounting brackets.

Category: USED

1 x 2-pin Connector to PowerTap 18 inch Cable
1 x Hot Shoe Adapter (1/4"-20 inch)
2 x Antenna 2dBi WiFi 2.4/5.8 GHz
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm

Receptor (RX)

1 x Lightstand Adapter (1/4"-20 inch)
1 x USB 2.0 Cable (A-Male to Mini-B)
1 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable
1 x HDMI 18in Cable (Type A to Type A)
1 x SDI (BNC to BNC) Cable 25cm
5 x Antenna 2dBi WiFi 2.4/5.8 GHz

Added features:

Metadata, TC, start/stop flags from certain camera manufacturers
3D Luts, 5Ghz spectrum analizer, manual channel selection
Color sampling: SDI: YCCr 4:2:2, 10bit (8bit when format conversion is enabled) / HDMI: RGB 4:4:4:4, 8bit
Audio Compression: 48kHz 24bit PCM
Power supply: 2pin connector 7-28 VDC
Sizes and weights: TX: 10.2x 6,6x 2,4cm (226g) and RX: RX: 13,8x 8,9x 2,4cm (376g)

DJI Transmission (high brightness monitor package)
- Transmission at 1080p/60 fps at 6 km
- Automatic frequency balance without interruption
- Ultra-low latency from end to end
- Integrated wireless receiver
- Stabilizing/focus/camera control
- Independent recording and reproduction

Includes video transmitter, high-gloss remote monitor and accessories (parasol, NPF and WB37 battery adapter, 2 wb37 batteries, USB-C to Lemo cable, RS stabilizer mounting plate, USB-C cable, SDI cable, DC power cable, D-Tap alloy cable, tool kit, case and 2 antennas

Category: USED

Hollyland Cosmo C2 is a kit of a emitter and a video/audio point-to-point receiver in real time HD video (up to 1080p60), capable of transmitting and receiving signal up to a maximum distance of 1Km meters (according to circumstances). 2 years warranty.

Includes HDMI (only input or output only) and SDI (input and loop on the transmitter and double output on the receiver). Both parts, emitter and receiver, are delivered in a pair of compact, robust and lightweight bodies, forming an effective wireless solution for short-range transmission with ultra low latency of 33 milliseconds (2 frames in 1080p60)

Cosmo C2 also includes special functions such as the ability to connect two transmitters to a receiver (and this extract double video signal), detection and automatic change of frequencies, connection of the receiver to a computer and use it in UVC Pull-stream mode as if of a webcam it was treated, transmit to YouTube or other RTMP platforms, offer IP output signal ethernet RJ45 of type NDI-HX 3 (of low streaming)

The emitter (210 grams) can be powered (10W of consumption) by means of a Sony L feeder or battery (or compatible), and the receiver (440 grams 11w of consumption) using a VLock power supply or battery (including height).

The product kit includes

Cosmo C2 Transmitter
Cosmo C2 Receiver
7 antennas
Shoe Mount
USB Type-C Adapter
DC Adapter

Note: This model does not allow the use of monitor apps.

Hollyland Cosmo C2 is a kit of 2 emitters and 1 video receiver/audio point-to-point in real time HD video (up to 1080p60), able to transmit and receive signal up to a maximum distance of 1Km meters (according to circumstances). 2 years warranty.

Includes HDMI (only input or output only) and SDI (input and loop on the transmitter and double output on the receiver). Both parts, emitter and receiver, are delivered in a pair of compact, robust and lightweight bodies, forming an effective wireless solution for short-range transmission with ultra low latency of 33 milliseconds (2 frames in 1080p60)

Cosmo C2 also includes special functions such as the ability to connect two transmitters to a receiver (and this extract double video signal), detection and automatic change of frequencies, connection of the receiver to a computer and use it in UVC Pull-stream mode as if of a webcam it was treated, transmit to YouTube or other RTMP platforms, offer IP output signal ethernet RJ45 of type NDI-HX 3 (of low streaming)

The emitter (210 grams) can be powered (10W of consumption) by means of a Sony L feeder or battery (or compatible), and the receiver (440 grams 11w of consumption) using a VLock power supply or battery (including height).

The product kit includes

Cosmo C2 Transmitter x2
Cosmo C2 Receiver
7 antennas
Shoe Mount
USB Type-C Adapter
DC Adapter

Note: This model does not allow the use of monitor apps.